Flat cut out aluminum letters
Letters, numbers and logos that are cut out from solid sheets of aluminum of 1/4", 3/8" and 1/2" thick.
We custom brush and powder coat clear.
Fonts can be ordered custom.
Brush options are: orbital, horizontal and vertical.
Logos can be ordered with an acrylic back plate,
Installation options are flat to the wall (with double sided tape), 1/2" off the wall (with 3/16" threaded rods and aluminum spacers) or mounted to a back plate with four aluminum stand-offs

Foam letters and numbers are fabricated out of 4", 6", 8", 10" and12" thick foam material and range from 12" to 46" in height. These can be used for names, parties, weddings, anniversaries, expo shows with your corporate logo or any type of special event. Signs and displays are recommended for inside use but also can be used for temporary outdoor use.

These Do it Yourself foam category is where we cut all the foam for you and you do all the painting and putting them together the way you want them. This economy foam line is unpainted, however, if needed, painted is an option below to select. Paint is applied to sides, front and back of the letters.

Visit other foam product options if you require a more professional look. We accomplish a better look by adding a matching finish material cut out and place to the front surface of the foam letter. The added piece is made of styrene that is .063 thickness and is covered with bright colored laminated vinyl that can either match the sides of the foam or you can have a different contrasting color. Paint is applied to sides and back of the letters.

We also offer the Professional Foam Letters with a 1/8" acrylic face or an .040 color aluminum face. Visit the other foam categories.

Flat cut out aluminum letters
Letters, numbers and logos that are cut out from solid sheets of aluminum of 1/4", 3/8" and 1/2" thick.
We custom use powder coated colors.
Fonts can be ordered custom.
Logos can be ordered with an acrylic back plate,
Installation options are flat to the wall (with double sided tape), 1/2" off the wall (with 3/16" threaded rods and aluminum spacers) or mounted to a back plate with four aluminum stand-offs

Formed plastic numbers are 12" in height and 1" deep. They are dimensional, economic and ideal for a building address or suite numbers. These are also approved by the Fire Department and can be used for most buildings.

Instructions to order:
** Type your information needed and add the total number of digits to the cart for calculation ***

Foam number sets are perfect for all anniversary events as table top foam displays. Size is 18" height and 4" thick. They come joined together and unpainted. You can leave them white or can decorate them yourself. Add paint, glitter, beads, photographs or anything you want.

Number sets include a rectangular base under the numbers. This base keeps the numbers together. The size of the rectangular base is justified with the size of the numbers.

Number set is a two digit number starts with 10 and goes to 99.

Base price is for foam cut with no extra finish. Font is a standard condensed font.

Fill in the options below:

Jumbo and Thick letters and numbers are fabricated out of 6", 9", or 12" thick foam material and range from 12" to 96" in height. We can customize these displays to reach almost any height or thickness. These can be used for names, parties, weddings, anniversaries, expo shows with your corporate logo or any type of special event. These Thick and Jumbo foam signs and displays are recommended for inside use but also can be used for temporary outdoor use. Thick and Jumbo Foam can stand alone or with other pieces, with a flat bottom cut or with a base added to the display. Thinner displays can stand up against the wall or be lightly mounted. This foam line is available painted or unpainted.

For the more professional look you can order the foam painted and it will have a smooth face finish. This is accomplished by adding a matching cut out to the front surface of the foam. The added piece is made of styrene that is .064 thickness and is covered with bright colored laminated vinyl that can either match the sides of the foam or you can have a different contrasting color. Paint is applied to sides, front and back of the letters.
We also offer the Professional Foam Letters with a 1/8" acrylic face or an .040 color aluminum face.

Base price for this product is for a sign size 18" x 36" x 1/4" clear acrylic.
Additional options:
* Backplate Material: Acrylic 1/4" thickness, or 1/2" thickness for an additional price.
* Acrylic Type Options: Clear, clear green tinted that looks like glass and frosted.
* Backplate corners are square. (You can specify rounded at no additional cost.
* Logo Materials are: *Colored Vinyl, Sandblasted type vinyl or digitally printed logo

Base price for this product is for a sign size 18" x 36" x 1/4" clear acrylic. Logo and letters are cut out from .040 gold or silver aluminum that are laminated flat against the backplate.
Additional options:
* Acrylic Backplate is 1/4" thickness material, optional to select 1/2" thickness for an additional price.
* Acrylic Types: Clear or green clear tinted that looks like glass or frosted.
* Backplate corners are square. (You can specify rounded corners at no additional cost.
* Additional aluminum letter options are 1/4" solid aluminum with brush finish and clear coated or 1/4" solid aluminum with metalic gold powder coat for real gold look.
* Mounting options are flat installation or 1/2" off the backplate.
--- NOTE: Logo parts need to be at least 3" to 4" to be cut out of metal. Small letters part of your logo will not be included. ---
Additional options on sizes and materials please select from below.